Skip to main content

Oil and Gas

Oil and Gas


APV DELTA SV1 / SVS1F Butterfly ValvesThe APV DELTA butterfly valves from SPX FLOW are stop valves which can be actuated either manually or pneumatically. The valves are very robust and reliable and the space saving design makes them ideal for nearly all applications - a flexible valve which is very easy to install and to service.Advantages

Graco EcoQuip EQ100M Vapour Blasting Unit

Graco EcoQuip 100M
Graco EcoQuip 100M

The EcoQuip EQ100M vapour blasting unit, complete with Galvanised blast pot, Stainless steel control panel, plumbing and components along with a 10-Gallon UV protected poly water tank

  • Holds over 100Kg of abrasive
  • Fully Portable with slide rails
  • Uses 185CFM- 350 CFM compressor depending on the level of blast
  • Utilises any abrasive heavier than water
  • Ships complete with blast hose and nozzle

Hydraulic Submersible 3" Semi-Trash Pumps

The SPTS3TR model is designed for difficult pumping jobs where stringy solids are present.A fully recessed vortex impeller allows this pump to handle difficult solids found in sewage applications.It has the ability to pass through a 12 inch opening and continue to pump in debris laden job sites.

Valves for Drilling and Production

Manual and HydraulicPressures up to 15,000 PSI for Various SizesMeets or Exceeds API 6A Standards & NACE MR-01-75Internal Parts Interchangeable with OEM

WECO Cementing and Circulating Hoses


Sizes 1-3"
Pressure 6,000 to 15,000 psi
Threaded and integral versions available
Sour gas version available

WECO Pup Joints

WECO Pup Joint
WECO Pup Joint

FMC Technologies offers the smallest, lightest integral forged fittings on the market. To minimize the size and weight of each fitting, engineers performed a finite element stress analysis on each fitting body design. From these results, the geometry was optimized for weight, and forgings were developed for each size and type of fitting. The fittings were then subjected to laboratory and field testing. The result: You save weight and space without sacrificing service life or safety.

WECO Integral Fittings


Weco fittings and pup joints have been optimized for minimum weight and size.

These rugged products are ideal for handling a complete range of standard and sour gas well servicing fluids at pressures up to 20,000 psi.

Available in 1 to 4-inch sizes, both fittings and pups feature forged construction with integral Weco wing union ends for a high strength, high-integrity connection every time.

Weco pups and fittings come with full material traceability and can be supplied with Charpy impact values.

Like all pressure containing products, Weco pups and fittings require special handling (see inside back cover of the attached brochure for Warnings and Cautions).

WECO Pressure Relief Valves

WECO Pressure Relief Valve
WECO Pressure Relief Valve

Recommended service -
Over pressure protection for pumps, treating lines, and pressure vessels.

Note: The FMC Technologies valve is not considered a full flow relief valve; therefore, its main function is a tattletale which indicates the set pressure has been reached. To keep the pressure from continuing to increase, other measures must be taken.

WECO Plug Valves

WECO Plug Valve
WECO Plug Valve

Weco ULT and DR plug valves are premium, quarter-turn valves designed for a wide range of standard and sour gas drilling, production, and well-servicing applications.

These rugged valves are offered in single and dual-body designs in pressures to 20,000 psi. They range in size from 1 to 4-inches and come with threaded, Weco wing union, flanged, and clamp hub ends.

Consult factory for configurations.

Like all pressure containing products, Weco plug valves require special handling (see inside back cover of the attached brochure for Warnings and Cautions).

WECO Choke Throttle Valves

1" WECO Choke Valve
1" WECO Choke Valve

The best attributes of a ported cage choke and a plug valve are combined in FMC’s flowline choke valve.

The choke portion of the valve is used to throttle high velocity flows while the plug valve portion of the valve remains full open.

The plug valve portion is protected by the choke from high velocity erosive flow.

Because of the combined use of the two halves of the valve, high velocity erosive flows can be throttled without degrading the positive shutoff performance of the valve. (see inside back cover of the brochure for Warnings and Cautions).

Syndicate content