Skip to main content

Utilities

Utilities

Graco EcoQuip EQ100M Vapour Blasting Unit

Graco EcoQuip 100M
Graco EcoQuip 100M

The EcoQuip EQ100M vapour blasting unit, complete with Galvanised blast pot, Stainless steel control panel, plumbing and components along with a 10-Gallon UV protected poly water tank

  • Holds over 100Kg of abrasive
  • Fully Portable with slide rails
  • Uses 185CFM- 350 CFM compressor depending on the level of blast
  • Utilises any abrasive heavier than water
  • Ships complete with blast hose and nozzle

Valves for Drilling and Production

Manual and HydraulicPressures up to 15,000 PSI for Various SizesMeets or Exceeds API 6A Standards & NACE MR-01-75Internal Parts Interchangeable with OEM

WECO Check Valves

WECO Check Valve
WECO Check Valve

Weco check valves are used to isolate well-servicing equipment from high-pressure treating fluids during fracturing applications.

Offered in three primary models, these rugged valves seal against a complete range of well-servicing fluids at pressures to 20,000 psi.

Valves are available in 1-1/2 to 4-inch bore sizes for standard and reverse flow.

Sour gas models available.

Consult factory for configurations.

Like all pressure containing products, Weco check valves require special handling.

Silvan Selecta 100L DIESEL POWER UNIT 12V - 40L/MIN

SQDN100
SQDN100
Flow: 
40 lpm

Fitted with a 12-volt diesel pump, delivery hose, and auto shut-off gun.
Code: SQDN100-1
DescriptionThe rugged Selecta Diesel range transfer tanks are available in a range of capacities from 50 litres to 2200 litres, with a range of pump options also available.
ApplicationDiesel Transfer Equipment

Model SPT435DT W1122BCD Pump Diesel Unit

Diesel powered high pressure pumping unit designed for continuous duty applications as a “mud pump” for diamond (core) drilling use.
 
Pump unit components:


  • FMC Bean model W1122BCD rated 37 US GPM@1000 PSI with ball valves

  • Kubota type D1105, three cylinder, liquid cooled diesel rated 19 continuous, 25 intermittent B.H.P @ 3000 RPM c/w 12V electric start

  • Model 40M43 with integral reduction gear 4 speed to provide pump input speeds of 192, 278, 500 and 833 RPM at 2500 engine RPM

  • 8” Automotive clutch assembly directly connected

Syndicate content